Home

Sow Molds

Furnace Pots

Air Cooled
Ingot Molds

Water Cooled
Ingot Molds

Die Casting
Machine Pots

Pullmore
Clutch Parts

Contact Us
Die Casting Machine Pots

Our die casting machine pots are guaranteed to fit.

Ask us about our guaranteed 2 week delivery on pots and molds not in stock.

PATTERN   INSIDE FLANGE DEPTH CAPACITY
NUMBER TYPE OF MACHINE DIMENSIONS DIMENSIONS INSIDE CUBIC INCHES
60 SPRINGFIELD DIE CASTING 11 15 8 1/4 600
125 AMERICAN HYDRA CAST MACH. 10 TON 12 X 16 3/4 20 X 16 7 3/4 750
190 KUX K-5 MACH. 11 3/8 DEPTH 12 X 15 3/4 21 X 16 3/4 11 3/8 1100
195 #41 MACHINE DUAL DEPTH RECTANGLE 25 1/4 X 11 3/8 27 1/2 X 15 11 1/8 TO 5 7/8 2470
200 AMERICAN DIE CASTING MACH. #60HYD 24 1/4 X 11 3/4 28 3/4 X 17 1/2 11 3/4 1400
220 WORK HORSE MACHINE 28 3/4 X 10 7/8 32 3/8 X 14 1/4 13 1/2 2300
270 CASTMASTER MACHINE Z#5 - #7 28 1/2 X 12 5/8 32 1/8 X 16 15 3/8 3700
290-P POT 20 1/2 9 3/4 8 1/4 2200
365 FRECH DAW - 60 MACHINE 28 1/2 X 11 15 1/2 X 33 14 1/4 2350
380 AMERICAN DIE CASTING #150-Z 15 1/4 X 25 28 1/2 X 22 1/4 11 1/2 2700
381 AMERICAN DIE CASTING # 150-Z 22 3/8 X 15 1/4 28 3/8 X 22 1/4 11 1/2 2700
410 CASTMASTER MACHINE #9Z #250 37 1/4 X 16 1/8 39 1/8 X 19 1/4 19 5/8 6000
445-P AMERICAN DIE CAST MACHINE 43 3/4 X 16 1/2 48 1/2 X 22 11 3/4 5900
463-REG KUX MACHINE BH-12 BH-18 BH-30 24 3/4 X 12 3/4 33 X 22 15 1/4 3400
463-SPEC KUX MACHINE SPEC. 4 CORNERS CAST FULL 24 3/4 X 12 3/4 33 X 22 15 1/4 3400
480 REED PRENTICE MACH. B & T 400 TON SPEC. 36 1/8 X 20 39 9/16 X 24 17 5/8 7300
500 D.C.M.T. MACHINE MARK II 39 3/4 X 20 46 X 26 9 1/4 4300
550 LESTER MACHINE 2 1/2 200 TON 19 3/4 27 1/2 23 5900
560 KUX MACHINE BH-200 TON 26 1/2 X 16 3/4 34 3/4 X 30 16 1/2 5500
610 REED PRENTICE MACH. BT 400 TON 37 X 24 3/4 42 X 30 21 1/2 9200
650 REED PRENTICE MACHINE #1 1/2 400 TON 47 X 14 1/4 52 3/4 X 19 1/4 21 3/4 5800
660 KUX MACHINE BH 400 TON 32 7/8 X 14 3/8 40 1/2 X 23 15 3/4 6400
705 CLEVELAND MACHINE 400-C 30 X 19 1/4 35 1/2 X 24 1/4 17 1/4 7500
730 SPEC. REED PRENTICE MACH. BT 400 TON 35 X 19 1/4 42 X 26 1/4 16 7/8 7400
745 NATIONAL H-502-X 39 X 20 44 X 26 15 1/2 6900
760 KUX MACHINE BH 400 TON 31 1/8 X 17 38 3/4 X 26 1/8 18 7600
805 200 TON FRECH MACHINE 29 X 15 3/4 34 3/8 X 21 19 1/4 7000
825 KUX MACHINE BH 600 TON 27 X 23 1/4 37 X 33 1/2 21 1/4 11500
970 IDRA. OL/Z-400 38 1/2 X 14 1/8 42 1/4 X 18 7/8 17 7/8 8100
1150 LESTER HP 400 TON 34 3/4 X 20 42 1/2 X 28 1/2 23 11700
1150-A LESTER 400 TON 34 3/4 X 20 42 1/2 X 28 1/2 26 13700


Contact us for pricing and more information
 
Palm Industrial Center 1862D Tollgate Rd. Palm, PA 18070 Tel: 215-541-1100 Fax: 215-541-1199
| Home | Sow Molds | Furnace Pots | Air Cooled Ingot Molds | Water Cooled Ingot Molds | Die Casting Machine Pots | Pullmore Clutch Parts | Contact Us |
Copyright © 2004 Pottstown Division of Dynaform Technologies Website by B2B Design & Development LLC